Magnum-dynalab MD-106T Manuel d'utilisateur

Magnum Dynalab MD 106T/106TR ANALOG FM TUNER INSTRUCTION MANUAL

- 10 - IMAGE OF REMOTE

- 11 - TROUBLESHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION No sound, meter lights are not on • Power cord disconnected • Power off at so

- 12 - RECEPTION TECHNIQUES Antenna Cabling: The lead-in cable from the antenna is often the weakest link in the FM system. Some time spent on sel

- 13 - outdoors, but regardless of whether it is installed indoors or outdoors the higher that you can put it the better it will perform. Magnum D

- 14 - PRODUCT SPECIFICATIONS Usable sensitivity- Mono – 0.7 uV 9.0 dBf 50 dB quieting – Mono – 2.0 uV 9.9 dBf 50 dB quieting – Stereo

- 15 - SAFETY SHEET IMPORTANT SAFETY INSTRUCTIONS 1. KEEP THESE INSTRUCTIONS 2. HEED ALL WARNINGS 3. FOLLOW ALL INSTRUCTIONS 4. DO NOT USE

- 16 - LIMITED WARRANTY Register your product at www.magnumdynalab.com Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees thi

- 2 - TABLE OF CONTENTS A MESSAGE FROM THE PRESIDENT 3 UNPACKING YOUR 106T 4 SETTING UP YOUR MD 106T 5 CONTROLS AND FUNCTIONALITY 6 DISPLAYS AND M

- 3 - A Message From the President Thank you for choosing the Magnum Dynalab “MD 106T” FM Tuner. Great care has been given in the design, manufactu

- 4 - UNPACKING YOUR 106T Carefully inspect all sides of the shipping carton for damage. If there are marks or holes in the carton make note of the

- 5 - SETTING UP YOUR MD 106T 1. Place your tuner the shortest distance possible from your pre-amplifier/ integrated amplifier, being careful to a

- 6 - CONTROLS AND FUNCTIONALITY A. ANTENNA A/B SELECTOR – Switches the MD 106T between A1 (antenna 1) and A2 (antenna 2) antenna inputs found on

- 7 - DISPLAYS AND METERS G. MULTI-PATH METER - This meter indicates the amount of multi-path, the lower the reading the better. H. SIGNAL STENGT

- 8 - CHECKING OUT YOUR MD 106T 1. Place your power switch to the “ON” position (B on diagram). This should turn on your tuner’s meter lights and

- 9 - TUNER REMOTE (OPTIONAL) If your tuner was ordered with the RC2 “PRECISION REMOTE SYSTEM”, here are the operating instructions. 1. The power